preliminary data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. photocoupler PS9313L,PS9313L2 1 mbps, open collector output type, high cmr, intelligent power module drive 8 mm creepage 6-pin sdip photocoupler ? nepoc series ? document no. pn10689ej02v0ds (2nd edition) date published april 2008 ns printed in japan 2007, 2008 the mark shows major revised points. the revised points can be easily s earched by copying an "" in the pdf file and specifying it in the "find what:" field. description the PS9313L and PS9313L2 are optical coupl ed isolators containing a gaalas led on the input side and a photo diode and a signal processing circuit on the output side on one chip. the PS9313L and PS9313L2 are specified high cmr, high ctr and pulse wid th distortion with operating temperature. it is suitable for ipm drive. the PS9313L is lead bending type (gull- wing) for surface mounting. the PS9313L2 is lead bending type for long creepage di stance (gull-wing) for surface mount. features ? high common mode transient immunity (cm h , cm l = 15 kv/ s min.) ? half size of 8-pin dip ? long creepage distance (8 mm min. : PS9313L2) ? high-speed response (t phl = 500 ns max., t plh = 750 ns max.) ? maximum propagation delays (t plh ? t phl = 220 ns typ.) ? pulse width distortion ( ? t phl ? t plh ? = 220 ns typ.) ? high isolation voltage (bv = 5 000 vr.m.s.) ? open collector output ? pb-free product applications ? ipm driver ? general purpose inverter led output on l off h truth table 64 13 2 5 1. anode 2. nc 3. cathode 4. gnd 5. v o 6. v cc pin connection (top view)
preliminary data sheet pn10689ej02v0ds 2 PS9313L,PS9313L2 package dimensions (unit: mm) lead bending type (gull-wing) for surface mount 0.250.15 9.70.3 3.70.25 0.80.25 0.20.15 7.62 3.50.2 6.80.25 4.580.25 (0.82) PS9313L 0.40.1 0.25 m 1.27 lead bending type for long creepage distance (gull-wing) for surface mount 0.20.15 PS9313L2 11.50.3 6.80.25 4.580.25 0.250.15 0.750.25 (0.82) 3.70.25 3.50.2 7.62 0.40.1 0.25 m 1.27
preliminary data sheet pn10689ej02v0ds 3 PS9313L,PS9313L2 marking example rank code year assembled (last 1 digit) week assembled n 8 31 9313 n831 no. 1 pin mark assembly lot type number photocoupler construction parameter PS9313L PS9313L2 air distance (min.) 7 mm 8 mm outer creepage distance (min.) 7 mm 8 mm isolation distance (min.) 0.4 mm 0.4 mm
preliminary data sheet pn10689ej02v0ds 4 PS9313L,PS9313L2 absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current *1 i f 25 ma reverse voltage v r 5 v detector supply voltage v cc ? 0.5 to +35 v output voltage v o ? 0.5 to +35 v output current i o 15 ma power dissipation *2 p c 100 mw isolation voltage *3 bv 5 000 vr.m.s. operating ambient temperature t a ? 40 to +110 c storage temperature t stg ? 55 to +125 c *1 reduced to 0.33 ma/ c at t a = 70 c or more. *2 reduced to 2.0 mw/ c at t a = 75 c or more. *3 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-3 shorted together , 4-6 shorted together. recommended operating conditions parameter symbol min. typ. max. unit supply voltage v cc 4.5 15 30 v output voltage v o 0 30 v forward current (on) i f (on) 8 12 ma forward voltage (off) v f (off) 0 0.8 v
preliminary data sheet pn10689ej02v0ds 5 PS9313L,PS9313L2 electrical characteristics (t a = ? 40 to +110 c, v cc = 15 v, unless otherwise specified) parameter symbol conditions min. typ. *1 max. unit diode forward voltage v f i f = 10 ma, t a = 25 c 1.2 1.56 1.9 v reverse current i r v r = 3 v, t a = 25 c 10 a terminal capacitance c t v = 0 v, f = 1 mhz 60 pf detector low level output voltage v ol i f = 10 ma, i ol = 2.4 ma 0.13 0.6 v high level output current i oh v cc = 30 v, v f = 0.8 v 1.0 50 a high level supply current i cch v cc = 30 v, v f = 0.8 v, v o = open 0.6 1.3 ma low level supply current i ccl v cc = 30 v, i f = 10 ma, v o = open 0.7 1.3 ma coupled threshold input current (h l) i fhl v o = 0.8 v, i o = 0.75 ma 0.75 5.0 ma current transfer ratio (i c /i f ) ctr i f = 10 ma, v o = 0.6 v 44 110 % isolation resistance r i-o v i-o = 1 kv dc 10 11 isolation capacitance c i-o v = 0 v, f = 1 mhz 0.7 pf propagation delay time (h l) t phl i f = 10 ma, r l = 20 k , c l = 100 pf, v thhl = 1.5 v, v thlh = 2.0 v 240 500 ns propagation delay time (l h) t plh 460 750 maximum propagation delays t plh ? t phl ? 200 220 650 pulse width distortion (pwd) ? ? t plh ? c, i f = 0 ma, v o > 3.0 v, v cm = 1.5 kv, r l = 20 k , c l = 100 pf 15 kv/ s common mode transient immunity at low level output cm l t a = 25 c, i f = 10 ma, v o < 1.0 v, v cm = 1.5 kv, r l = 20 k , c l = 100 pf 15 kv/ s *1 typical values at t a = 25 c.
preliminary data sheet pn10689ej02v0ds 6 PS9313L,PS9313L2 usage cautions 1. this product is weak for static el ectricity by designed with hi gh-speed integrated circuit so protect against static electricity when handling. 2. by-pass capacitor of 0.1 f is used between v cc and gnd near device. also, ens ure that the distance between the leads of the photocoupler and c apacitor is no more than 10 mm. 3. avoid storage at a high te mperature and high humidity. notes on handling cautions regarding noise be aware that when voltage is applied suddenly bet ween the photocoupler?s i nput and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
preliminary data sheet pn10689ej02v0ds 7 PS9313L,PS9313L2 the information in this document is current as of april, 2008. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
PS9313L,PS9313L2 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. ? do not burn, destroy, cut, crush, or chemically di ssolve the product. ? do not lick the product or i any way allow it to enter the mouth.
|
